Last login: Mon Nov 18 12:54:43 on ttys001
Macbook-Pro:~ kaankalkan$ cat /tmp/AppleIntelInfo.dat
cat: /tmp/AppleIntelInfo.dat: Permission denied
Macbook-Pro:~ kaankalkan$ sudo -s
Password:
bash-3.2# cat /tmp/AppleIntelInfo.dat
AppleIntelInfo.kext v2.4 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 1
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x11516f47c9f (59 MHz)
MWAIT C-States...........................: 286531872

Processor Brandstring....................: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz

Processor Signature..................... : 0x806EB
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 11
 - Model................................ : 0x8E (142)

Model Specific Registers (MSRs)
------------------------------------------

MSR_CORE_THREAD_COUNT............(0x35)  : 0x14
------------------------------------------
 - Core Count........................... : 4
 - Thread Count......................... : 8

MSR_PLATFORM_INFO................(0xCE)  : 0x4043DF1011400
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x14 (2000 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 1 (LPM supported)
 - Number of ConfigTDP Levels........... : 2 (additional TDP level(s) available)
 - Maximum Efficiency Ratio............. : 4
 - Minimum Operating Ratio.............. : 4

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x1E008008
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 0 (not enabled)
 - CFG Lock............................. : 1 (MSR locked until next reset)
 - C3 State Auto Demotion............... : 1 (enabled)
 - C1 State Auto Demotion............... : 1 (enabled)
 - C3 State Undemotion.................. : 1 (enabled)
 - C1 State Undemotion.................. : 1 (enabled)
 - Package C-State Auto Demotion........ : 0 (disabled/unsupported)
 - Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x51814
------------------------------------------
 - LVL_2 Base Address................... : 0x1814
 - C-state Range........................ : 5 (C-States not included, I/O MWAIT redirection not enabled)

IA32_MPERF.......................(0xE7)  : 0x4C28F0554D
IA32_APERF.......................(0xE8)  : 0x4F3827A2AE

MSR_FLEX_RATIO...................(0x194) : 0x0
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x18DF00001300
------------------------------------------
 - Current Performance State Value...... : 0x1300 (1900 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0xA00
------------------------------------------
 - Target performance State Value....... : 0xA00 (1000 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x10
------------------------------------------
 - High-Temperature Interrupt Enable.... : 0 (disabled)
 - Low-Temperature Interrupt Enable..... : 0 (disabled)
 - PROCHOT# Interrupt Enable............ : 0 (disabled)
 - FORCEPR# Interrupt Enable............ : 0 (disabled)
 - Critical Temperature Interrupt Enable : 1 (enabled)
 - Threshold #1 Value................... : 0
 - Threshold #1 Interrupt Enable........ : 0 (disabled)
 - Threshold #2 Value................... : 0
 - Threshold #2 Interrupt Enable........ : 0 (disabled)
 - Power Limit Notification Enable...... : 0 (disabled)

IA32_THERM_STATUS................(0x19C) : 0x882E2808
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 1
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 1
 - Current Limit Status................. : 0
 - Current Limit log.................... : 1
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 46
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x3640000
------------------------------------------
 - Turbo Attenuation Units.............. : 0 
 - Temperature Target................... : 100
 - TCC Activation Offset................ : 3

MSR_MISC_PWR_MGMT................(0x1AA) : 0x401CC1
------------------------------------------
 - EIST Hardware Coordination........... : 1 (hardware coordination disabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x29292D2E
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 2E (4600 MHz) 
 - Maximum Ratio Limit for C02.......... : 2D (4500 MHz) 
 - Maximum Ratio Limit for C03.......... : 29 (4100 MHz) 
 - Maximum Ratio Limit for C04.......... : 29 (4100 MHz) 

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x5
------------------------------------------
 - Power Policy Preference...............: 5 (balanced performance and energy saving)

MSR_POWER_CTL....................(0x1FC) : 0x24005F
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x42819800DD8198
------------------------------------------
 - Package Power Limit #1............... : 51 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
 - Time Window for Power Limit #1....... : 110 (163840 milli-Seconds)
 - Package Power Limit #2............... : 51 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 0 (disabled)
 - Time Window for Power Limit #2....... : 33 (10 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x2F22362
------------------------------------------
 - Total Energy Consumed................ : 3016 Joules (Watt = Joules / seconds)

MSR_PP1_POWER_LIMIT..............(0x640) : 0x0

MSR_PP1_ENERGY_STATUS............(0x641) : 0x52508
------------------------------------------
 - Total Energy Consumed................ : 20 Joules (Watt = Joules / seconds)

MSR_PP1_POLICY...................(0x642) : 0x18
------------------------------------------
 - Priority Level....................... : 24

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x12
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x80050
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x1400C8
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC3_IRTL...................(0x60a) : 0x884E
MSR_PKGC6_IRTL...................(0x60b) : 0x8876
MSR_PKGC7_IRTL...................(0x60c) : 0x8894
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x1652F9361C
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x829D6B1488
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x1652F9361C
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x829D6B1488
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0

MSR_PLATFORM_ENERGY_COUNTER......(0x64D) : 0x0 (not supported by hardware/BIOS)

MSR_PPERF........................(0x64E) : 0x2240A4B2B5
------------------------------------------
 - Hardware workload scalability........ : 147113423541

MSR_CORE_PERF_LIMIT_REASONS......(0x64F) : 0x7D000100
------------------------------------------
 - PROCHOT Status....................... : 0
 - Thermal Status....................... : 0
 - Residency State Regulation Status.... : 0
 - Running Average Thermal Limit Status. : 0
 - VR Therm Alert Status................ : 0
 - VR Therm Design Current Status....... : 0
 - Other Status......................... : 1 (frequency reduced below OS request due to electrical or other constraints)
 - Package/Platform-Level #1 Power Limit : 0
 - Package/Platform-Level #2 Power Limit : 0
 - Max Turbo Limit Status............... : 0
 - Turbo Transition Attenuation Status.. : 0
 - PROCHOT Log.......................... : 0
 - Thermal Log.......................... : 0
 - Residency State Regulation Log....... : 0
 - Running Average Thermal Limit Log.... : 0
 - VR Therm Alert Log................... : 0
 - VR Thermal Design Current Log........ : 0
 - Other Status Log..................... : 1 (status bit has asserted)
 - Package/Platform-Level #1 Power Limit : 1 (status bit has asserted)
 - Package/Platform-Level #2 Power Limit : 1 (status bit has asserted)
 - Max Turbo Limit Log.................. : 1 (status bit has asserted)
 - Turbo Transition Attenuation Log..... : 1 (status bit has asserted)
HDC Supported

IA32_PKG_HDC_CTL.................(0xDB0) : 0x0

IA32_PM_CTL1.....................(0xDB1) : 0x1
------------------------------------------
HDC Allow Block..................(0xDB1) : 1 (HDC blocked)

IA32_THREAD_STALL................(0xDB2) : 0x0

MSR_PKG_HDC_CONFIG...............(0x652) : 0x2
------------------------------------------
Pkg Cx Monitor ..................(0x652) : 2 (count package C3 and deeper)
MSR_CORE_HDC_RESIDENCY...........(0x653) : 0x0

MSR_PKG_HDC_SHALLOW_RESIDENCY....(0x655) : 0x0

MSR_PKG_HDC_DEEP_RESIDENCY.......(0x656) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0x115277C4056
MSR_PPERF........................(0x63E) : 0x1 (19)

IA32_PM_ENABLE...................(0x770) : 0x1 (HWP Supported and Enabled)

IA32_HWP_CAPABILITIES............(0x771) : 0x10C122E
-----------------------------------------
 - Highest Performance.................. : 46
 - Guaranteed Performance............... : 18
 - Most Efficient Performance........... : 12
 - Lowest Performance................... : 1

IA32_HWP_INTERRUPT...............(0x773) : 0x1
------------------------------------------
 - Guaranteed Performance Change........ : 1 (Interrupt generated on change of)
 - Excursion Minimum.................... : 0 (Interrupt generation disabled)

IA32_HWP_REQUEST................(0x774) : 0x20202E04
-----------------------------------------
 - Minimum Performance................. : 4
 - Maximum Performance................. : 46
 - Desired Performance................. : 32
 - Energy Efficient Performance........ : 32
 - Activity Window..................... : 0, 0
 - Package Control..................... : 0

IA32_HWP_STATUS..................(0x777) : 0x0
-----------------------------------------
 - Guaranteed Performance Change....... : 0 (has not occured)
 - Excursion To Minimum................ : 0 (has not occured)

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......:  4 ( 400 MHz)
Maximum non-Turbo Ratio/Frequency........: 20 (2000 MHz)
Maximum Turbo Ratio/Frequency............: 46 (4600 MHz)

IGPU Info:
------------------------------------------
IGPU Current Frequency...................:    0 MHz
IGPU Minimum Frequency...................:  300 MHz
IGPU Maximum Non-Turbo Frequency.........:  300 MHz
IGPU Maximum Turbo Frequency.............: 1150 MHz
IGPU Maximum limit.......................: No Limit

P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (11) 19 20 ] iGPU P-States [ ]
CPU C3-Cores [ 0 3 5 6 ]
CPU C7-Cores [ 0 1 4 6 7 ]
CPU P-States [ 11 (16) 19 20 21 ] iGPU P-States [ ]
CPU C3-Cores [ 0 1 3 4 5 6 7 ]
CPU C7-Cores [ 0 1 4 5 6 7 ]
CPU P-States [ (9) 11 16 19 20 21 ] iGPU P-States [ ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 ]
CPU C7-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ (8) 9 11 16 19 20 21 ] iGPU P-States [ ]
CPU P-States [ 8 (9) 11 16 19 20 21 22 ] iGPU P-States [ ]
CPU P-States [ 8 9 11 (16) 19 20 21 22 ] iGPU P-States [ (18) ]
CPU P-States [ 8 9 11 16 19 20 21 22 (36) ] iGPU P-States [ 18 ]
CPU P-States [ 8 9 11 (12) 16 19 20 21 22 36 ] iGPU P-States [ 18 ]
CPU P-States [ 8 9 11 12 16 19 20 21 22 (23) 36 ] iGPU P-States [ (18) ]
CPU P-States [ 8 9 11 12 (13) 16 19 20 21 22 23 36 ] iGPU P-States [ 18 ]
bash-3.2# 
